Garrett GTX2867R Gen II

Garrett GTX2867R Gen II

Regular price$1,638.64
/
654 Entries 2X

  • Low stock - 2 items left
  • Backordered, shipping soon
Size chart
All units are expressed in inches. Measurements are taken by laying garment on a flat surface. Length is measured from the top of the shoulder to the base of the garment. Width is measured from the bottom of one arm hole across the chest to the bottom of other arm hole. Use these measurements to compare to a similar garment in your wardrobe. 
All units are expressed in inches. Measurements are taken by laying garment on a flat surface. Length is measured from the top of the shoulder to the base of the garment. Width is measured from the bottom of one arm hole across the chest to the bottom of other arm hole. Use these measurements to compare to a similar garment in your wardrobe. 

This is listing is for the SUPERCORE ONLY! You will need to purchase your hot-side exhaust housing separately.


Horsepower:
275 - 550

Displacement: 1.4L - 2.5L

FEATURES

  • GEN II AERODYNAMICS FEATURE INCREASED HORSEPOWER RANGE
  • 50mm TURBOCHARGER COMPRESSOR OPTION
  • IMPROVED PORTED SHROUD DESIGN FOR SURGE RESISTANCE
  • NEW FULLY MACHINED SPEED SENSOR PORT.
  • SOLD AS ASSEMBLY KITS (SUPER CORE + TURBINE HSG)

                          Turbocharger Part Number Chart:

                          Compressor Turbine
                          Super Core Reference Data Inducer Exducer Trim A/R Inducer Exducer Trim
                          GTX2867R 50mm 67mm 55 0.60 54mm 47mm 76
                          Notes: Assembly Kit PN Super Core PN Turbine Kit PN A/R Inlet Outlet Wastegate Divided
                          Assembly Kit PN Includes Super Core and Turbine Kit 856800-5007S 849894-5002S 827690-0003 0.64 T25 5 bolt Wastegated N
                          856800-5008S 849894-5002S 827690-0004 0.86 T25 5 bolt Wastegated N
                          856800-5005S 849894-5002S 827690-0001 0.57 V-Band V-Band Free Float N
                          856800-5006S 849894-5002S 827690-0002 0.72 V-Band V-Band Free Float N

                          GTX GEN II: THE NEXT GENERATION IN TURBOCHARGING TECHNOLOGY

                          Garrett Motion is excited to introduce the GTX2867R GEN II Turbocharger. The GTX GEN II is the next evolution of our GTX line with major updates and new technology. Updates include a compressor wheel aero update that gives it the ability to produce up to 20% more horsepower than the previous version.

                          REDEVELOPED COMPRESSOR WHEELS

                          GTX GEN II compressor wheels were designed using proprietary Garrett Motion computer simulation technology focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger.

                          Each GTX GEN II turbocharger can create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle. The 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability through its reduction in shaft motion.

                          FULLY-MACHINED INLET, OUTLET AND SHROUD

                          The GEN II GTX Series Turbochargers feature a fully-machined compressor inlet, fully-machined compressor outlet, and fully-machined ported shroud for precise and accurate tolerances.

                          REDESIGNED HIGH-FLOWING COMPRESSOR HOUSING

                          We also added a brand-new compressor housing featuring a high-flowing design matched perfectly for the new compressor wheel upgrade. GEN II compressor housings are not interchangeable with GEN I compressor wheels; however, all GEN II turbochargers are outline interchangeable with the equivalent GT and GTX GEN I products making a turbo swap easy to perform using all existing piping.

                          FULLY-MACHINED SPEED SENSOR PORT

                          The new compressor housings are equipped with a fully machined speed sensor port that accepts the Garrett Motion speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine-tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be removed using a 5mm Allen key when ready to install a speed sensor kit.

                          CROSS COMPATIBILITY TURBO TURBINE HOUSING KIT PLATFORM

                          All GEN II GTX series turbochargers are compatible with all existing GT and GTX turbine housings kits. GEN II turbochargers are only offered through Garrett Motion authorized distribution centers.

                          Check These Out!